Remove/Install Passenger Bench Seat Backrest Padding - Ar91.21-D-0002TSS

MODEL 907.6/7 

with code U60 (Seats passenger compartm. 2seater bench 1st row) 

with code U61 (2-passenger bench seat, 2nd row) 

with code U62 (Seats pass. comp. 3-seat bench 1st row narrow) 

with code U63 (Seats passenger compartm. 3seater bench 2nd row) 

with code U64 (Seat pass. comp. 3seat bench 3rd row) 

with code U65 (Seats pass. comp. 3seat bench 1st row) 

with code U69 (2-passenger bench seat, 3rd row) 

with code UC3 (Pass. comp. seating, 3-seater bench/narrow 2nd row) 

with code UD6 (Passenger seats, 4-seater bench 3rd row) 

with code UY3 (4-passenger bench seat, Comfort, 3rd row) 

MODEL 907.745 

with code U3S (Passenger compartment seats, 3-passenger bench seat, narrow, 3rd row) 

with code UD7 (Passenger compart. seating, 4-seater bench 4th row) 

with code UY6 (4-passenger bench seat, Comfort, 4th row) 

Shown with code U60 (Rear passenger compartment seats, 2-passenger bench seat, 1st row) 

Shown with code U60 (Rear passenger compartment seats, 2-passenger bench seat, 1st row) 

Shown with code U60 (Rear passenger compartment seats, 2-passenger bench seat, 1st row) 

Shown with code UD7 (Rear passenger compartment seating, 4-passenger bench seat, 4th row), right side 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Remove passenger bench seat		AR91.21-D-4425TS
2	Remove passenger bench seat head restraint guides		AR91.16-D-2805TS
3	Remove passenger bench seat armrests	Model 907.6/7 with code U74 (Wall side armrests) and with code U75 (Aisle side armrests)	AR91.21-D-3301TS
4	Remove passenger bench seat belt end fittings		AR91.40-D-1030-02TS
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
		Bolt, seat belt end fitting to seat frame for passenger bench seat	*BA91.40-N-1002-02TS
		Long wedge	Fig 1
5	Remove trims of right seat belt guides		AR91.40-D-1207TS
6	Remove trims of center seat belt guides	Model 907.6/7 with code U62 (Seats pass. comp. 3-seat bench 1st row narrow) Model 907.6/7 with code U63 (Seats passenger compartm. 3seater bench 2nd row) Model 907.6/7 with code U64 (Seat pass. comp. 3seat bench 3rd row) Model 907.6/7 with code U65 (Seats pass. comp. 3seat bench 1st row) Model 907.6/7 with code UC3 (Pass. comp. seating, 3-seater bench/narrow 2nd row) Model 907.6/7 with code UD6 (Passenger seats, 4-seater bench 3rd row) Model 907.6/7 with code UY3 (4-passenger bench seat, Comfort, 3rd row) Model 907.745 with code U3S (Passenger compartment seats, 3-passenger bench seat, narrow, 3rd row) Model 907.745 with code UD7 (Passenger compart. seating, 4-seater bench 4th row) Model 907.745 with code UY6 (4-passenger bench seat, Comfort, 4th row)	AR91.40-D-1208TS
7	Remove trims of left seat belt guides		AR91.40-D-1209TS
8	Remove connections (13)	Model 907.6/7 with code UD6 (Passenger seats, 4-seater bench 3rd row) Model 907.6/7 with code UY3 (4-passenger bench seat, Comfort, 3rd row) Model 907.745 with code UD7 (Passenger compart. seating, 4-seater bench 4th row) Model 907.745 with code UY6 (4-passenger bench seat, Comfort, 4th row) For this purpose, remove screws (12). Bolt, support on passenger bench seat to seat backrest frame	*BA91.21-N-1003-01TS
9	Remove mounting rails (1) from seat backrest frame (2)	Extraction hook	Fig 2
10	Open zippers (3) of seat backrest cover (4)	To do so, pull out zippers (3) at seat backrest frame (2).
11	Remove trim (6) from seat backrest frame (2)	To do so, remove mounting rails (7). Then lay seat backrest cover (4) over seat backrest and remove screws (5). Extraction hook	Fig 2
12	Remove seat backrest padding (9) with se backrest cover (4)	To do so, remove mounting rails (8) from seat backrest frame (2) and remove seat backrest cover (4) with seat backrest padding (9) upwards from seat backrest frame (2). Installation  : Ensure that the seat backrest cover (4) and seat backrest padding (9) are seated correctly.
13	Remove seat backrest cover (4) from seat backrest padding (9)	When replacing the seat backrest padding (9) or the seat backrest cover (4). To do so, remove mounting rails (10) of seat backrest cover (4) at retaining clips (11) of seat backrest padding (9). Installation  : Ensure that the seat backrest cover (4) is correctly seated on the seat backrest padding (9). Check retaining clips (11). If the retaining clips (11) are damaged ↓ Replace seat backrest padding (9).
14	Transfer cuts for armrests to new seat backrest cover (4/0	Model 907.6/7 with code U74 (Wall side armrests) and with code U75 (Aisle side armrests) When replacing the seat backrest cover (4). To do so, take cuts for armrests from old seat backrest cover (4) and mark on new seat backrest cover (4). Installation  : Add marked cuts for armrests on new seat backrest cover (4) using a suitable tool.
15	Remove grommets at seat backrest frame (2) for armrests.	Model 907.6/7 with code U74 (Wall side armrests) and with code U75 (Aisle side armrests) When replacing the passenger bench seat.
16	Install in the reverse order

Number	Designation		Model 907.6/7
BA91.21-N-1003-01TS	Bolt, support on passenger bench seat to seat backrest frame	Nm	40

Number	Designation		Model 907.6/7
BA91.40-N-1002-02TS	Bolt, seat belt end fitting to seat frame for passenger bench seat	Nm	40