Remove/Install Seat Base For Front Passenger Bench Seat - Ar91.10-D-3523TS

Model 907 

Shown on model 907 with code H00 (Hot air duct to rear passenger compartment), with code Y16 (Fire extinguisher) and except code B25 (Electric parking brake) 

Shown on model 907 with code H00 (Hot air duct to rear passenger compartment), with code Y16 (Fire extinguisher) and except code B25 (Electric parking brake) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Remove front passenger bench seat.	Model 907 with code S23 (Co-driver's seat double seat)	AR91.10-D-1035TS
2	Remove battery carrier of auxiliary battery in vehicle interior.	Model 907 with code E2I (Auxiliary battery for retrofitted consumers, interior)	AR54.10-D-0031TS
3	Unscrew nut (2) and remove air duct (3).	Model 907 with code H00 (Hot-air duct to passenger compartment)
4	Unclip electrical wiring harnesses (4) from seat base (1).	he number of electrical wiring harnesses (4) may vary depending on the vehicle equipment. Clip remover	Fig 1
5	Release floor coverings (5) until the screws (6) are accessible.		AR68.80-D-0006TSF
		Model 907	AR68.80-D-0006TSR
6	Remove screws (6, 7).	Bolt, seat base to vehicle floor	*BA91.10-N-1007-01TS
7.1	Loosen seat base (1) from air duct (8) and remove from the vehicle.	Model 907 with code H00 (Hot-air duct to passenger compartment) Helper required. Ensure correct seating of air duct (8) in the seat base (1).
7.2	Remove seat base (1) and remove from the vehicle.	Model 907 except code H00 (Hot-air duct to passenger compartment)   Helper required.
8	Install in the reverse order.

FRONT SEATS

Fig 1: Clip Remover (452 589 01 63 00)