Remove/Install Seat Base For Front Passenger Seat - Ar91.10-D-3522TS

Model 907 

Shown on model 907 with code H00 (Hot air duct to rear passenger compartment) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1.1	Remove front passenger seat.	Model 907 except code SR8 (Swivel base for driver' seat)	AR91.10-D-1000TS
1.2	Remove turn plate with installed front passenger seat.	Model 907 with code SR8 (Swivel base for driver' seat) Do not disconnect front passenger seat from turn plate.	AR91.10-D-1456TS
2	Remove seat base cover (2).
3	Remove battery carrier of auxiliary battery in vehicle interior.	Model 907 with code E2I (Auxiliary battery for retrofitted consumers, interior)	AR54.10-D-0031TS
4	Release floor coverings (3) until the screws (5) are accessible.		AR68.80-D-0006TSF
		Model 907	AR68.80-D-0006TSR
5	Remove cover (4).	Model 907 with code H00 (Hot-air duct to passenger compartment)
6	Remove screws (5, 6).	Bolt, seat base to vehicle floor	*BA91.10-N-1007-01TS
7	Remove seat base (1) and remove from the vehicle.	Remove seat base (1) carefully and when doing so pay attention to electrical wiring harnesses. Otherwise damage to the vehicle's electrical system can occur.
8	Install in the reverse order.

FRONT SEATS