Remove/Install Suspension Module Shock-Absorber Strut - Ar91.10-D-0006TS

Model 907 

with code SB3 (Suspension seat, comfort version, driver's seat) 

Model 907 

with code SB4 (Suspension seat, comfort version, co-driver's seat) 

	Risk of injury  . Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
	Remove/install
1	Remove boot.	The suspension module must release at the release lever.	AR91.10-D-3445TS
2	Unscrew nuts (1).
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Note on calculation of tightening torque when using insertion or socket tools with various effective lengths	Commercially available tools  Open end wrench bit sz 13 mm	AH00.00-P-0015-01CW
		Screw, shock-absorber strut to suspension module frame	*BA91.10-N-1010-01TS
3	Remove bolts (2).	Protect contact areas of lever on suspension module and on draw spring (3) when removing upper screw (2). Otherwise, damage may occur to the suspension module and to the draw spring (3). To do so, push draw spring (3) down at upper screw (2) using a suitable lever in the removal area.
4	Remove shock-absorber strut (5).	For this, remove shock-absorber strut (5) upwards. : Observe installation position of shock-absorber strut (5).
5	Install in the reverse order.

FRONT SEATS