LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2019 >> Sprinter 2500 Van Cargo Extended, RWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seats, Bunks, Restraint Systems - Description & Operation, General Information, Basic Knowledge, Safety Precautions, Testing & Repair, Maintenance, Retrofitting & Conversion >> Testing & Repair >> Removing, Installing WINDOWBAG - Ar91.60-D-0693TS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removing, Installing WINDOWBAG - Ar91.60-D-0693TS

Model 907 

G13792163
G13792164
CAUTION Risk of injury  during testing and repair operations related to pyrotechnical components Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F.
Disconnect current supply when working on such component parts.
AS91.00-Z-0008-01A 
  Notes on carrying out repair work in the vehicle interior   AH68.00-N-0001-01S
  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
  Information, assessment and legal requirements when working with, handling and storing pyrotechnical components   AH91.00-Z-0000-10A 
REMOVINGINSTALLING Remove/install     
1 Detach ground line of on-board electrical system battery.   AR54.10-D-0029TS
2 Detach ground line from additional battery. Model 907 with code E2M (Auxiliary battery for retrofitted consumers, engine compartment) AR54.10-D-0004TSR
Model 907
with code E2I (Auxiliary battery for retrofitted consumers, interior)
AR54.10-D-0004TS
3 Remove corresponding A-pillar trim.   AR68.30-D-4051TS
4 Release corresponding B-pillar trim (3) in the upper area. Remove/install B-pillar trim on driver's side Model 907.2/7 AR68.30-D-4707TS
Remove/install B-pillar trim on front passenger sideModel 907.2/7 AR68.30-D-4706TS
Remove/install B-pillar trim Model 907.1/6 AR68.30-D-4705TS
5 Remove stowage box/tray over windshield.   AR68.30-D-5577TS
6 Pull out window airbag (1) under roof lining (2) and B-pillar trim (3) until the electrical connector (4) is accessible.    
7 Release and disconnect electrical connector (4).    
8 Remove screws (5) and remove holder (6).    
9 Push shackles (arrows B) together with suitable pliers through the openings (arrows A) and remove retaining clamps (7) from the A-pillar.    
10 Unclip retaining clip (8). SPECIAL TOOL Clip remover Fig 1
11 Remove screw (9) and remove window airbag (1). TORQUE SPECIFICATION Screw, window airbag check strap to body *BA91.60-D-1004-01TS 
12 Install in the reverse order.    
TORQUE SPECIFICATION AIRBAG

Number Designation Model 907
BA91.60-D-1004-01TS Screw, window airbag check strap to body Nm 7
Fig 1: Clip Remover (452 589 01 63 00)
G13792165