Remove/Install Outside Mirror Trim - Ar88.70-D-9040TS
Model 907
except code FS1 (Mirror support, extended)
except code FS2 (Extra-long mirror bracket)
except code XL4 (Weight variant 5.500 kg)
except code ZU7 (National version for Canada)
except code ZU8 (National version for USA)
Shown on left outside mirror with code JB6 (Parking Package with 360° camera)
| Remove/install | |||
| 1 | Remove upper and lower mirror glass at left and/or right outside mirror. | AR88.70-D-9020TS | |
| 2 | Pull out locks (2) and remove. | ||
| 3 | Unclip mirror frame (3) from outside mirror trim (1) and remove. | Fig 1 | |
| 4.1 | Remove turn signal lamp. | Model 907 except code FU5 (Outside mirror without turn signal) | AR82.25-D-4727TS |
| 4.2 | Slide panel towards rear and remove. | Model 907 with code FU5 (Outside mirror without turn signal) | |
| 5 | Remove ambient lamp. | Model 907 with code JB6 (Parking Package with 360° camera) | AR82.10-D-0001TS |
| 6 | Remove side camera with bracket. | Model 907 with code JB6 (Parking Package with 360° camera) | AR54.65-D-0015TS |
| 7 | Release catches (4) and remove outside mirror trim (1). | If damage is present, ↓ Replace outside mirror trim (1). |
|
| 8 | Install in the reverse order. |