Parameterizable Special Module (PSM) Signals, Basic Function - GF54.21-S-1016A

Model All (Light transporter) 

Overview 

This document contains information on:

• General 
• Function 

General 

The signal list of the PSM control unit can be displayed through XENTRY Diagnosis COM Kit.

Function 

The following steps must be performed for display in XENTRY Diagnosis COM Kit:

• Select the PSM control unit in the XENTRY Diagnosis COM Kit.
• Retrieve information about the PSM control unit (meaning operate the button with the book symbol).
• Select the "Help for control unit" tab.
• Select the menu item "Signal list".

The signal list can be displayed in two different formats:

• Display of entire signal list
• Display of signal list in categories

If "Signal list displayed in categories" is selected, the signals are grouped in the following categories:

• Internal information of PSM control unit
• Vehicle equipment
• State of vehicle
• Inputs
• Analog inputs
• Analog/digital converter
• Outputs
• Pulse width modulated (PWM) signal
• Illumination and signaling horn
• Central locking
• Wiping, washing and heating of windows
• Displays in instrument cluster
• Further data from interior CAN
• Engine CAN
• Body manufacturer CAN
• Working speed control
• Power take-off
• Engine start and engine stop
• Speed limit
• Engine run-on
• Electric step
• Programmable logic controller (PLC)