Remove/Install SAM Control Unit, Passenger Side - AR54.21-S-1257E
Model 447, 448
Except Code XM7 (MOPF II)
Fig 1: Signal Acquisition And Actuation Module (SAM) Components Location - Model 447 Except Code XM7 (Shown On 447.8## 1#)
Shown on model 447.8## 1#
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | Notes on carrying out repair work in the vehicle interior | AH68.00-D-0001-01KOS | |
| Remove/install | |||
| 1 | Buffer basic data of signal acquisition and actuation module (SAM) control unit (N10/1) in diagnostic system. | When replacing the signal acquisition and actuation module (SAM) control unit (N10/1). | |
| AD00.00-S-2000-04E | |||
| 2 | Disconnect ground line from battery. | AR54.10-S-0003E | |
| 3 | Remove trim in front passenger side footwell. | AR68.30-S-4030E | |
| 4 | Remove cover under passenger side instrument panel. | Model 447.6/7 with code LC7 (Illumination for front footwell) except code XM7 (MOPF II) Model 448 except code XM7 (MOPF II) |
AR68.10-S-1520E |
| 5.1 | Remove glove compartment. | Model 447, 448 with code F66 (Glove compartment, lockable) except code XM7 (MOPF II) |
AR68.10-S-1400E |
| 5.2 | Remove stowage compartment. | Model 447 except code F66 (Glove compartment, lockable) except code XM7 (MOPF II) |
AR68.10-S-1610E |
| 6 | Disconnect electrical connectors (1). | ||
| 7 | Remove bolts (2). | ||
| 8 | Disconnect electrical connector (3). | ||
| 9 | Slide signal acquisition and actuation module (SAM) control unit (N10/1) upwards out of the A-pillar. | ||
| 10 | Install in the reverse order. |