(Remove/Install Sound Generator Control Unit - AR82.27-S-0005EE)
Model 447.6/7
With Code J2A (Acoustic ambient protection)
With Code ME0 (Electric motor 85 kW)
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Raise vehicle. | AR00.60-S-1000E | |
| 2 | Release screws (1) and lead out sound generator control unit (N12/2) together with holder (2) until electrical connector (3) is accessible. | ||
| 3 | Release and disconnect electrical connector (3) and remove sound generator control unit (N12/2) together with holder (2). | ||
| 4 | Remove screws (4) and remove holder (2) from sound generator control unit (N12/2). | If sound generator control unit (N12/2) is replaced. | |
| 5 | Install in the reverse order. | ||
| 6 | Commission sound generator control unit (N12/2). | If sound generator control unit (N12/2) was replaced. | |
| AD00.00-S-2000-04E | |||
| Check | |||
| 7 | Perform function test of sound generator control unit (N12/2). |