Caravan Control Unit Light Status, Function - GF54.21-D-5038TSA
Model 447
with code JA3 (Intelligent body control.)
with code XM7 (MOPF II)
Model 907, 910
with code JA3 (Intelligent body control.)
General
A basic function of the MB Advanced Control, control unit (N175) is the status query.
The MBAC can read out statuses in the following light circuits:
- White light circuit
- RGB light circuit
Pulse width modulation (PWM)
White light circuit
The MBAC can read out the current target value for the brightness of a dimmable illuminant between 0 % and 100 % with an accuracy of 0.1 %. To do so, a dimmable illuminant must be connected to the "DO_PWM_Weiss1_dimmer" interface of the MBAC and be controllable.
The MBAC enables the user to set the actual target value for the brightness of a dimmable illuminant between 0 % and 100 % with an accuracy of 0.1 %. To do so, a dimmable illuminant must be connected to the "DO_PWM_Weiss1_dimmer" interface of the MBAC and be controllable.
The MBAC can read out the current target value for the brightness of a dimmable illuminant between 0 % and 100 % with an accuracy of 0.1 %. To do so, a dimmable illuminant must be connected to the "DO_PWM_Weiss2_dimmer" interface of the MBAC and be controllable.
The MBAC enables the user to set the actual target value for the brightness of a dimmable illuminant between 0 % and 100 % with an accuracy of 0.1 %. To do so, a dimmable illuminant must be connected to the "DO_PWM_Weiss2_dimmer" interface of the MBAC and be controllable.
The MBAC can read out the current target value for the brightness of a dimmable illuminant between 0 % and 100 % with an accuracy of 0.1 %. To do so, a dimmable illuminant must be connected to the "DO_PWM_Weiss3_dimmer" interface of the MBAC and be controllable.
The MBAC enables the user to set the actual target value for the brightness of a dimmable illuminant between 0 % and 100 % with an accuracy of 0.1 %. To do so, a dimmable illuminant must be connected to the "DO_PWM_Weiss3_dimmer" interface of the MBAC and be controllable.
The MBAC enables the user to read out the current status of an illuminant (switched on or off). To do so, a pushbutton switch must be connected to the "DI_Lichtkreis_Weiss1_Pushbutton switch" interface of the MBAC and be controllable, and the pushbutton switch must be assigned to an illuminant.
The MBAC enables the user to read out the current status of an illuminant (switched on or off). To do so, a pushbutton switch must be connected to the "DI_Lichtkreis_Weiss2_Pushbutton switch" interface of the MBAC and be controllable, and the pushbutton switch must be assigned to an illuminant.
The MBAC enables the user to read out the current status of an illuminant (switched on or off). To do so, a pushbutton switch must be connected to the "DI_Lichtkreis_Weiss3_Pushbutton switch" interface of the MBAC and be controllable, and the pushbutton switch must be assigned to an illuminant.
RGB light circuit
The MBAC enables the user to read out the current target value for the intensity of the red color channel between 0 % and 100 % with a resolution of at least 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Red" interface and the red color channel of the illuminant must be controlled separately.
The MBAC enables the user to read out the current target value for the intensity of the green color channel between 0 % and 100 % with a resolution of at least 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Green" interface and the green color channel of the illuminant must be controlled separately.
The MBAC enables the user to read out the current target value for the intensity of the blue color channel between 0 % and 100 % with a resolution of at least 0.1 %. To do so, an illuminant must be connected to the "DO_PWM_RGB_RGB_Blue" interface and the blue color channel of the illuminant must be controlled separately.
The MBAC enables the user to read out the current status of an illuminant (switched on or off). To do so, a pushbutton switch must be connected to the "DI_Light_Circuit_RGB_Pushbutton_Switch" interface of the MBAC and the pushbutton switch must be assigned to an illuminant
| Caravan control unit light control, function | GF54.21-D-5037TSA | ||
| Overview of system components of caravan control unit | Model 907, 910 | GF54.21-D-9992TSA | |
| Overview of system components of caravan control unit | Model 447 | GF54.21-S-9992TMA |