Remove/Install Seat Belt Buckle For Front Passenger Seat - Ar91.40-D-1060TSB

Model 907.6 

with code S20 (Co-driver's seat, static, folding) 

with code SH2 (Thorax/pelvis side-impact airbag, front passenger) 

with code ZU7 (National version for Canada) 

with code S20 (Co-driver's seat, static, folding) 

with code SH2 (Thorax/pelvis side-impact airbag, front passenger) 

with code ZU8 (National version for USA) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Disconnect electrical connector	Unlock the electrical connection (1).
2	Remove electrical wiring harness (2).	To do so, release electrical wiring harness (2) from retaining clip (4) and unclip retaining clip (3). : Check retaining clips (3, 4) for damage. Clip remover If retaining clips (3, 4) are damaged, Replace retaining clips (3, 4).	Fig 1
3	Remove seat belt buckle (5).	Removal  : Mark assembly position of seat belt buckle (5). To do so, remove screw (6). Installation  : Observe marking indicating assembly position of seat belt buckle (5) and use thread locking agent.
		Screw, folding front passenger seat belt buckle to seat frame	*BA91.40-N-1010-03TS
		Thread locking adhesive, Loctite 241	*BR00.45-Z-1131-02A
4	Install in the reverse order.
	Check
5	Perform function check on seat belt buckle (5).

SEAT BELT BUCKLE, SEAT BELT, SEAT BELT END FITTING, SEAT BELT HEIGHT ADJUSTER

Fig 1: Clip Remover (452 589 01 63 00)