LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2025 >> eSprinter Base, _NA_ >> Repair and Diagnosis (Single Page) >> TMC Recommended Practices >> Onboard Vehicle Electronics >> RP 1210D - Windows (TM) Communication API >> RP 1210D - Windows(TM) Communication API >> RP 1210 Overview For The Application Developer >> Step 4 - Connecting To The DATABUS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Step 4 - Connecting To The DATABUS

The last step that an application must perform, after loading the DLL and all of the functions, is to connect through the VDA to the databus and allow messages to be read. Below is a snippet of code connecting to the VDA Vendor's Device ID = 1 and the J1939 protocol using automatic baud rate detection:

G15602267
scientia non olet · About LEMON Manuals