Values For The NCOMMANDNUMBER Parameter

TMC has reserved some values for the nCommandNumber parameter to support functionality considered required functionality. This section defines, in detail, the structure and constitution of these commands. The table below summarizes the send commands defined in this RP.

Command	Mnemonic (Defined in API Header File)	Value
Reset Device	RP1210_Rese_ Device	0
Set All Filter States to Pass	RP1210_Set_All_Filters_States_to_Pass	3
Set Message Filtering for J1939	RP1210_Set_Message_Filtering_For_Jl9 3 9	4
Set Message Filtering for CAN	RP1210_Set_Message_Filtering_For_CAN	5
Set Message Filtering for J1708	RP1210_Set_Message_Filtering_For_Jl7 0 8	7
Set Message Filtering for J1850	RP1210_Set_Message_Filtering_For_Jl8 5 0	8
Set Message Filtering for ISO15765	RP1210_Set_Message_Filtering_For_ISO15765	9
Generic Driver Command	RP1210_Generic_Driver_Command	14
Set J1708 Mode	RP1210_Set_J170 8_Mode	15
Set Echo Transmitted Messages	RP1210_Echo_Transmitted_Messages	16
Set All Filter States to Discard	RP1210_Set_All_Filters_States_to_Discard	17
Set Message Receive	RP1210_Set_Message_Receive	18
Protect J1939 Address	RP1210_Protect_J1939_Address	19
Set Broadcast List for J1708	RP1210_Set_Broadcast_For_J1708	20
Set Broadcast List for CAN	RP1210_Set_Broadcast_For_CAN	21
Set Broadcast List for J1939	RP1210_Set_Broadcast_For _1939	22
Set Broadcast List for J1850	RP1210_Set_Broadcas_ For_J1850	23
Set J1708 Filter Type	RP1210_Set_J1708_Filter_Type	24
Set J1939 Filter Type	RP1210_Set_J1939_Filter_Type	25
Set CAN Filter Type	RP1210_Set_CAN_Filter_Type	26
Set J1939 Broadcast Interpacket Timing	RP1210_Set_J1939_Interpacket_Time	27
Set Max Error Message Return Size	RP1210_SetMaxErrorMsgSize	28
Disallow Further Client Connections	RP1210_Disallow_Further_Connections	29
Set J1850 Filter Type	RP1210_Set_Jl850_Filter_Type	30
Release a J1939 Address	RP1210_Release_J1939_Address	31
Set ISO15765 Filter Type	RP1210_Set_ISO15765_Filter_Type	32
Set Broadcast List for ISO15765	RP1210_Set_Broadcast_For_ISO15765	33
Set ISO15765 Flow Control	RP1210_Set_ISO15765_Flow_Control	34
Clear ISO15765 Flow Control	RP1210_Clear_ISO15765_Flow_Control	35
Set J1939 Baud Rate	RP1210_Set_J1939_Baud	3 7
Set ISO15765 Baud Rate	RP1210_Set_ISO15765_Baud	38
Flush the Send/Receive Buffers	RP1210_Flush_Tx_Rx_Buffers	39
Intentionally Skipped	Previously_used_and_antiquated	40
Set Broadcast List for ISO14230	RP1210_Set_Broadcast_For_ISO14230	41
Set Broadcast List for ISO9141	RP1210_Set_Broadcast_For_ISO9141	42
What Speed Did the VDA Connect?	RP1210_Get_Protocol_Connection_Speed	45
Set ISO9141/ISO14230 Mode	RP1210_Set_ISO914ISO14230_Mode	46
Set CAN Baud Rate	RP1210_Set_CAN_Baud	47
Is the VDA operating in a wireless mode?	RP1210_Get_Wireless_State	48
Set Blocking Timeout	RP1210_Set_BlockTimeout	215
Set J1708 Baud Rate	RP1210_Set_J1708_Baud	305
Set J1850 Baud Rate	RP1210_Set_J1850_Baud	306