LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1982 >> Capri Black Magic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> MOTORCRAFT DURA-Spark II Ignition Systems >> Testing >> Module-To-Coil Wire Check
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Module-To-Coil Wire Check

  1. Disconnect control module 4-wire connector and ignition coil connector. Connect one ohmmeter lead to distributor base and the other to "TACH" terminal of ignition coil connector. Measure resistance and reconnect all connectors.
  2. If resistance is greater than 1 ohm, replace control module. If resistance is 1 ohm or less, inspect wiring harness between control module and ignition coil.
scientia non olet · About LEMON Manuals