LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1982 >> LN7 Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Column Switches - All Models >> Removal & Installation >> Speed Control Switch >> Removal (General Motors)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal (General Motors)

  1. Disconnect battery ground cable. Remove lower trim panel and disconnect switch harness connector. Connect 24" follower wire to end of switch harness connector.
  2. Pull turn signal lever (speed control lever) straight out of column. Remove lever and harness by pulling from column.
    NOTE: Leave follower wire in column to guide new wire harness back into column.