19) A/C Control Module Operation
Checks are made at harness side of A/C control module connector with module connected. See A/C CONTROL MODULE VOLTAGE TEST table for correct voltage. If voltage is not correct, replace A/C control module. If voltage is correct go to next step.
A/C CONTROL MODULE VOLTAGE TEST
| Test Conditions & Wire Color | Volts | |
|---|---|---|
| Key On, A/C Off Blower Off | ||
| Red | More Than 10 | |
| Yellow | More Than 10 | |
| Green | More Than 10 | |
| White/Blue | More Than 10 | |
| White/Blue | More Than 10 | |
| Yellow/Green | More Than 10 | |
| Key On, A/C Off Blower On | ||
| Red | 2.2 | |
| Yellow | More Than 10 | |
| Green | 1.5 | |
| White/Blue | 3.3 | |
| White/Blue | 3.3 | |
| Yellow/Green | 1.5 | |