LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Ignition Control) >> Glow Plug >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Glow Plug: Installation

WARNING: This page is about a different car, the 2004 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Screw glow plug(s) into cylinder head and tighten to 12 N.m (115 lbs. in) (Figure ).
  2. Connect the glow plug wiring harness connector(s)
  3. Install the engine cover.
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals