Stall Speed Test: Notes
NOTE:
After each test (5 seconds maximum), shift transaxle into Neutral and run engine for at least 1 minute to cool torque converter and transmission fluid.
CAUTION:
DO NOT
maintain Wide Open Throttle (WOT) in any gear for more than 5 seconds. If engine RPM exceeds maximum specified stall speed, release accelerator immediately. Clutch or band slippage is indicated.
The stall speed test checks the operation of the following components:
- Forward Clutch
- Reverse Clutch
- Low One-Way Clutch (Roller)
- Forward One-Way Clutch (Sprag)
- Engine Performance