LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1995 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Controls - Specifications - 7.3L Diesel) >> Injection Timing >> Static Timing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Static Timing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fast idle bracket and solenoid from injection pump. Using Pump Mounting Wrench (T83T-9000-B), loosen nuts holding injection pump to pump mounting adapter. Install Rotating Wrench (T83T-9000-C) on front of pump, and rotate to align timing mark on pump mounting flange with timing mark on pump mounting adapter. See Fig 1.
  2. Align timing marks to within .030". Remove rotating wrench and tighten nuts to 84 INCH lbs. (9.5 N.m). Install fast idle bracket and solenoid.
Fig 1: Aligning Injection Pump Timing Marks (7.3L)
G90E14997Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals