Speed Control Disengage Switch
WARNING: This page is about a different car, the 1996 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
Adjust brake pedal height. See BRAKE PEDAL HEIGHT . Measure distance between brake pedal stopper and threaded end of speed control disengage switch. See Fig 1 . Distance should be .012-.039" (0.3-1.0 mm). If distance is not as specified, loosen speed control disengage switch lock nut. Adjust switch until distance is as specified. Tighten lock nut to 9-11 ft. lbs. (12-15 N.m).