LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1996 >> Villager LS >> Repair and Diagnosis (Single Page) >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment Procedures >> Toe-In Adjustment
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Toe-In Adjustment

  1. Start engine. Center steering wheel. Secure steering wheel with holder and turn engine off. Loosen dust boot clamp (if equipped). Loosen tie rod end lock nut. Loosen steering gear dust boot clamp(s) at tie rod end. Turn tie rod end to obtain correct toe. See ALIGNMENT SPECIFICATIONS  .
  2. Clean and lubricate lock nut and tie rod threads. Tighten lock nut to specification. See TORQUE SPECIFICATIONS  . Ensure steering gear dust boot is straight after adjustment. Replace dust boot clamp.
scientia non olet · About LEMON Manuals