Normal Operation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The Driver Door Module (DDM) monitors the voltage from the battery to determine if it goes above or below specific thresholds.
- DTC B1318 (Battery Voltage Low) - a continuous memory or on-demand DTC that sets when the DDM detects battery voltage below 10 volts on circuit SBP12.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- High circuit resistance
- DDM