Normal Operation
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The DSM communicates with the diagnostic tool through the universal asynchronous receiver transmitter (UART)-based protocol (UBP) communications network circuit 1906 (VT). Check circuit 1906 (VT) between the DSM C341c and the data link connector (DLC) C251. The total resistance value must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in circuit 1906 (VT), damage to the DLC C251, damage to the DSM C341c, or a problem in the in-line connector.