| Air Cond Compressor Oil |
Gas |
|
5.00 OZS. |
0.14 L |
YN-12-D |
|
S |
| Air Cond Refrigerant |
|
|
2.00 LBS. |
0.9 KG |
R-134a |
|
S |
| Automatic Transmission Fluid |
Base,Premier |
|
10.20 QTS. |
9.65 L |
MOTORCRAFT Automatic Transmission Fluid MERCON V |
Indicates only approximate dry-fill capacity. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range.
Automatic Transmission that require MERCON V should only use MERCON V fluid or fluid that is specified dual usage MERCON/MERCON V. |
S |
| Brake Fluid |
|
|
N/A |
N/A |
MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid |
Fill to line on reservoir. |
S |
| Differential Gear Oil |
AWD |
Rear |
2.96 PTS. |
1.4 L |
SAE 80W-90 Premium Rear Axle Gear Oil |
Fill 1/4" to 9/16" (6 mm to 14 mm) below bottom of fill hole.
4WD/AWD vehicles exposed for prolonged periods to temperatures less than -40Deg.F (-40Deg.C) should change out the rear axle fluid to SAE 75W-140 axle lubricant. |
S |
| Engine Coolant |
Base,Premier,3.0L Eng |
|
10.60 QTS. |
10.03 L |
FORD Premium Gold Engine Coolant w/bittering agent |
Add the coolant type originally equipped in the vehicle. |
S |
| Engine Oil |
3.0L Eng |
w/Filter |
6.00 QTS. |
5.67 L |
SAE 5W-20 Premium Synthetic Blend Motor Oil |
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. |
S |
| Fuel Tank |
3.0L Eng |
|
16.50 GALS. |
62.45 L |
|
|
S |
| Transfer Case Fluid |
|
Power Transfer Unit |
0.35 QTS. |
0.33 L |
SAE 75W-140 Synthetic Axle Gear Oil |
The Power Transfer Unit is lubricated for life with synthetic lube. Lubricant levels are not to be checked or changed unless a leak is suspected or repair required. Replace Power Transfer Unit lubricant with specified synthetic lubricant anytime the unit is submerged in water. |
S |
| Windshield Washer Fluid |
|
|
2.70 QTS. |
2.55 L |
MOTORCRAFT Premium Windshield Washer Concentrate Fluid |
Follow the Manufacturer's Instructions for the mixture ratio. |
S |