LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1809 (Wiper System & Washer System) >> Description And Operation >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test A: The Wipers are Inoperative >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The wiper/washer module is hot at all times through circuit SBB09 (RD). When the ignition switch is in the RUN or ACCESSORY position, voltage is supplied to the wiper/washer module through circuit CBP45 (YE). The wiper/washer module and wiper motor are grounded through circuit GD121 (BK/ YE). The multifunction switch is grounded through circuit GD116 (BK/VT). The multifunction switch sends open and ground input signals to the wiper/ washer module through circuits CRW17 (GN/VT), CRW18 (VT/WH), CRW19 (BU/OG) and CRW08 (VT/OG) in order to activate the wiper motor to the requested modes. The wiper/washer module supplies voltage to the wiper motor through circuits CRW16 [(GY/BN) low] and CRW15 [(BN/WH) high].

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals