Normal Operation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Under normal operation, the wiper motor receives open and ground inputs from the multifunction switch through circuits CRW08 (VT/OG), CRW17 (GN/ VT), CRW18 (VT/WH) and CRW19 (BU/OG) to activate the wipers to the appropriate speeds. The wiper/washer module supplies voltage to the wiper motor through circuits CRW16 ([GY/BN] low) and CRW15 ([BN/WH] high).
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Multifunction switch
- Wiper/washer module