LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2009 >> Sable Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1158 (Automatic Transmission External Controls) >> Diagnostic Tests >> External Controls >> Pinpoint Tests >> Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1 CHECK THE SELECTOR LEVER LINKAGE 
    • Key in ON position.
    • Apply the brake pedal.
    • Gain access to the shift control linkage.
    • Actuate the selector lever in all ranges.
    • Observe all linkages during operation.
    • Is the linkage damaged? 
    1. YES  : INSTALL a new selector lever linkage. TEST the system for normal operation.
    2. NO  : Go to  B2.
  2. B2 CHECK THE SELECTOR LEVER CABLE 
    • Check selector lever cable and bracket installation and tightness.
    • Is the selector lever cable correctly installed and adjusted? 
    1. YES  : VERIFY the selector lever cable adjustment. REFER to Selector Lever Cable Adjustment . ADJUST the selector lever cable if necessary. Go to  B3 .
    2. NO  : REPAIR as necessary. TEST the system for normal operation.
  3. B3 CHECK THE LINKAGE/CABLE FOR THE CORRECT GEAR RELATIONSHIP 
    • Apply the brake pedal.
    • Actuate the selector lever in all ranges.
    • Does the indicator match the gear selection? 
    1. YES  : System OK. TEST the system for normal operation.
    2. NO  : ADJUST the selector lever indicator. REFER to Selector Lever Indicator Adjustment . TEST the system for normal operation.
scientia non olet · About LEMON Manuals