LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2009 >> Sable Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1318 (Automatic Transmission External Controls) >> Diagnostic Tests >> External Controls >> Pinpoint Tests >> Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1 CHECK THE SHIFT CONTROL LINKAGE 
    • Key in ON position.
    • Apply the brake pedal.
    • Actuate the transmission selector lever in all ranges.
    • Observe the shift control linkage during operation.
    • Is the shift control linkage OK? 
    1. YES  : Go to  B2.
    2. NO  : REPAIR as necessary. TEST the system for normal operation.
  2. B2 CHECK THE TRANSMISSION SELECTOR LEVER CABLE 
    • Check the transmission selector lever cable and bracket installation and tightness.
    • Is the transmission selector lever cable correctly installed and adjusted? 
    1. YES  : Go to  B3.
    2. NO  : REPAIR as necessary. TEST the system for normal operation.
  3. B3 CHECK THE LINKAGE/CABLE FOR CORRECT GEAR RELATIONSHIP 
    • Apply the brake pedal.
    • Actuate the transmission selector lever in all ranges.
    • Does the indicator match the gear selection? 
    1. YES  : VERIFY the correct adjustment of the digital transmission range (TR) sensor. REFER to AUTOMATIC TRANSAXLE/TRANSMISSION - 5R55S article. ADJUST the digital TR sensor if necessary. TEST the system for normal operation.
    2. NO  : ADJUST the transmission selector lever cable. REFER to Selector Lever Cable Adjustment . TEST the system for normal operation.
scientia non olet · About LEMON Manuals