61 31 231 Removing and Installing/Replacing Steering Wheel Electronics Control Unit

Necessary preliminary tasks: 

• Remove airbag unit  . See 32 34 020 REMOVING AND INSTALLING/REPLACING AIRBAG UNIT

E60, E61: Version with standard steering wheel, illustrations show steering wheel removed: 

Release screws (1).

Remove steering wheel retaining plate (2) upwards out of multifunction steering wheel (3).

Fig 1: Identifying Steering Wheel Retaining Plate, Multifunction Steering Wheel & Screws

Courtesy of BMW OF NORTH AMERICA, INC.

E60, E61: Version with sports steering wheel; E63, E64, illustrations show steering wheel removed: 

Release screws (1).

Release complete steering wheel retaining plate (4) with decorative trim (3) in direction of arrow from fixtures (2).

Disconnect associated plug connections and remove complete steering wheel retaining plate (4) with decorative trim (3).

Fig 2: Identifying Steering Wheel Retaining Plate, Decorative Trim & Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure electrical leads are correctly routed.

All: 

Pull steering wheel electronics control unit (1) in direction of arrow out of steering wheel (2).

Fig 3: Identifying Steering Wheel Electronics Control Unit & Steering Wheel

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Remove steering wheel electronics control unit (2).

Installation: 

Guide pins (3) of steering wheel electronics control unit (2) must be exactly seated in associated mountings.

Make sure electrical leads (4) are correctly routed.

Fig 4: Identifying Plug Connections, Guide Pins & Steering Wheel Electronics Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.