61 31 492 Replacing (Removing and Installing) Level Switch For Windscreen Washer Unit

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front underbody protection . See 51 47 490 REMOVING AND INSTALLING/REPLACING FRONT UNDERBODY PROTECTION

NOTE: Catch any escaping washer fluid if necessary.

Disconnect plug connection (1).

Turn level switch for windscreen washer unit (2) in direction of arrow and remove towards bottom from fluid reservoir for windscreen washer unit (3).

Fig 1: Identifying Plug Connection & Windscreen Washer Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fill fluid reservoir.