52 17... Removing and installing/replacing left or right thigh support

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Move thigh support (3) as far forward as possible.

Release screws (1).

Tightening torque 52 10 11AZ .

Disconnect plug connections (2).

Remove thigh support (3) towards top.

Fig 1: Identifying Plug Connections, Thigh Support And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, unclip cover (1) towards top and remove.

Installation note:

Secure guide pins (2) in seat frame and clip cover (1) into place.

Fig 2: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.