14. Modifications within program

Further modifications were carried out within the program which only slightly change the program sequence but which optimize the alignment in respect of comfort and speed. This is described below:

• Optimization of the rim run-out compensation in respect of speed.
• Optimization of the steering routines: Highlighted values within the gate can still be corrected. The message "Rotating plates not connected" no longer causes the steering routine to be cancelled. Further measurements can be carried out after the rotating plates have been connected.
• Standardization of screen colors with the colors on the tablet.
• Addition of texts in several foreign languages.
• Elimination of program-related and cosmetic faults.
• Electronic water level.
• Omission of kingpin inclination measurement.