LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2009 >> Cooper Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3473 (General Electrical System - Repair (ACTIVEHYBRID)) >> Plug Connection, Terminal, Fuse Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... In-line plugs, 6- to 50-pin, System Elo
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 13... In-line plugs, 6- to 50-pin, System Elo

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Unlock lock.

Fig 1: Releasing Cable Lock
G08573792Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten cable strap.

Installation: 

Cable clip must be reinstalled.

Fig 2: Locating Cable Strap
G08573793Courtesy of BMW OF NORTH AMERICA, INC.

Detach catch (1) from plug housing (2).

Fig 3: Disconnecting Plug Housing Catch
G08573794Courtesy of BMW OF NORTH AMERICA, INC.

Press out contact carrier (3) with wiring harness (4) through opening (5).

Fig 4: Removing Contact Carrier And Wiring Harness
G08573795Courtesy of BMW OF NORTH AMERICA, INC.

Hold down arrester hook (6) of defective contact and pull cable and contact up to secondary lock (8).

Fig 5: Pulling Secondary Lock Cable
G08573796Courtesy of BMW OF NORTH AMERICA, INC.

Hold down arrester hook once again in secondary lock (8) and pull cable and contact completely out of contact carrier.

Fig 6: Pulling Cable And Contact From Contact Carrier
G08573797Courtesy of BMW OF NORTH AMERICA, INC.