Section 1967 (Engine Electrical System - Repair - R55 (N12))
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, and 2008 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- Troubleshooting
- 12 00... Instructions for disconnecting and connecting battery
- 12 00... Instructions for working on the ignition system
- 12 00... Notes/information on removing and installing control units
- 12 00... Notes/information on start assistance (jump starting)
- 61 00... Notes on handling wiring harnesses and cables
- 61 20...Battery replacement information
- Ignition Wires, Spark Plugs
- Ignition Coil
- Electronic Switching Or Control Unit
- 12 14 521 Replacing pulse generator on crankshaft (N12, N14)
- 12 14 523 Replacing pulse generator on inlet camshaft (N12)
- 12 14 524 Replacing pulse generator on exhaust camshaft (N12)
- 12 14 550 Replacing control unit (DME)
- 12 14 600 Replacing knock sensor (N12, N14)
- 12 14 700 Coding control module (DME / DDE)
- 12 14 705 Programming control unit (DME / DDE)
- 12 63 520 Replacing DME master relay (N12, N14)
- Alternator With Drive And Mounting
- Controller
- Starter With Mounting
- Starter Lead
- Engine Wiring Loom
- Oil Pressure/Oil Temperature Gauge
- Coolant Temperature
- Switches And Relays