Disconnecting And Connecting Test Equipment
WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
When connecting and disconnecting:
- Service Tester
- Testing Devices
- Test Leads
- When Replacing Control Units
Follow instructions for removing and installing electronic control units. See REMOVING AND INSTALLING ELECTRONIC CONTROL UNITS .
Follow operating instructions for testing devices.
Make sure that connected test leads cannot make contact with rotating parts (e.g.: fans, ribbed V-belts, etc.).