32 00... Moving vehicle into normal position
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Check compliance with Test Conditions , bring vehicle to a stop if necessary.
- Version with air spring system:
- Carry out ride-height-calibration
- Pull fuse(s) for air supply unit control unit
- Version with air spring system: Carry out ride-height-calibration
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load (refer to TECHNICAL DATA ) into vehicle
- Determine Vehicle Ride Height
NOTE:
If the vehicle ride height is not inside the tolerance (refer to TECHNICAL DATA
), the vehicle must be repaired (coil spring/leakage).