84 11 612 Removing And Installing/Replacing Eject Box (In Rear Centre Armrest)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

IMPORTANT:

Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)

Remove storage tray/CD box.

Snap out trim (1) in upward direction and disconnect plug connections underneath.

Lift out mat insert (2).

Fig 1: Identifying Trim And Mat Insert

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out trim (1) with special tool 00 9 317.

Fig 2: Identifying Trim And Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever eject box (1) with special tool 00 9 317 out of fixture and feed out associated wiring harness.

Fig 3: Identifying Eject Box And Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.