31 35 005 Removing and Installing/Replacing Push Rod (Stabilizer Link) For Left/Right Stabilizer

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Observe safety instructions on raising the vehicle. See 00..... LIFTING VEHICLE WITH A LIFTING PLATFORM

NOTE: Stabilizer links may only be replaced in pairs.

Release nut; if necessary, grip brace at Torx socket.

Installation:

Replace self-locking nut.

Tightening torque 31 35 12AZ. See 31 35 STABILIZER BAR

Fig 1: Locating Self-Locking Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut; if necessary, grip brace at Torx socket.

Remove stabilizer link.

Installation:

Replace self-locking nut.

Tightening torque 31 35 12AZ. See 31 35 STABILIZER BAR

Fig 2: Locating Stabilizer Link

Courtesy of BMW OF NORTH AMERICA, INC.