61 31 162 Removing And Installing/Replacing Front Left Or Right Switch Combination

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove switch combination for seat adjustment. See 61 31 203 REPLACING SWITCH COMBINATION FOR SEAT ADJUSTMENT .

Unlock both retaining hooks (1) and detach seat adjustment switch (2) in direction of arrow from front switch combination (3).

Fig 1: Identifying Retaining Hooks And Front Switch Combination

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Both retaining hooks (1) of front switch combination (2) must snap fully into place.

Fig 2: Identifying Retaining Hooks And Front Switch Combination

Courtesy of BMW OF NORTH AMERICA, INC.