61 35 955 Removing And Installing/Replacing Interior Antenna For Comfort Access System - Driver's Side Front

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove footwell side trim panel on A-pillar on left . See 51 43 ... REMOVING AND INSTALLING/REPLACING DECORATIVE STRIP ON PANEL FOR LEFT OR RIGHT DOOR PILLAR .
Remove left front seat . See 52 17 000 REMOVING AND INSTALLING LEFT OR RIGHT FRONT SEAT (COMFORT) .

Release expansion rivets (1).

Fold up cable duct (2) cover in direction of arrow and remove from floor trim panel (3).

Installation:

Feed guide (4) of cable duct cover (2) correctly in floor trim panel (3).

Fig 1: Identifying Cable Duct Cover And Floor Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection (1) and disconnect.

Remove interior antenna for comfort access system (2) from floor trim panel (3).

Fig 2: Identifying Plug Connection And Floor Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.