61 31 134 Removing And Installing/Replacing USB/Audio Interface Connecting Socket

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM FOR STORAGE TRAY

Insert suitable screwdriver (1) through opening (2) in direction of arrow.

NOTE:

Protect connecting socket wiring harness against being damaged by screwdriver (1).

Press against connecting socket (3) in lower area.

Remove connecting socket (3) in direction of arrow.

Fig 1: Identifying Connecting Socket Wiring Harness

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Installation:

Retaining lug (3) must not be damaged.
Make sure connecting socket (2) is correctly seated in storage compartment (4).

Fig 2: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.