61 31 334 Removing And Installing/Replacing Grip Trim For Gear Selector Switch

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 322

Lever off side section (1) with special tool 00 9 322 from gear selector switch (2) and remove.

Installation:

Position side section (1) on metal pins of gear selector switch (2) and uniformly press down firmly and without leaving a gap.

Fig 1: Identifying Special Tool (00 9 322)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever off front shell (1) with special tool 00 9 322 from gear selector switch (2) and remove.

Press P button (3) and remove front shell (1) starting from top.

Installation:

Insert front shell (1) at bottom in retaining ring (4). Uniformly press front shell (1) upwards onto metal pins of gear selector switch (2) firmly and without leaving a gap.

Fig 2: Identifying Lever Off Front Shell With Special Tool (00 9 322)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever off P button (1) with special tool 00 9 322 from gear selector switch (2) and uniformly remove.

Installation:

After installing front shell, insert P button (1) into upper opening on gear selector switch and uniformly press in until it engages.

Fig 3: Identifying Lever Off P Button With Special Tool (00 9 322)

Courtesy of BMW OF NORTH AMERICA, INC.