61 31 492 Replacing (Removing And Installing) Level Switch For Windscreen Washer Unit

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT UNDERBODY PROTECTION

NOTE:

For purposes of clarity, illustration shows front wheel removed.

Release screws.

Fold back wheel arch trim (1) in direction of arrow.

Fig 1: Identifying Back Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Turn level switch for windscreen washer unit (2) in direction of arrow and remove towards bottom from fluid reservoir for windscreen washer unit (3).

Fig 2: Turning Level Switch For Windscreen Washer Unit

Courtesy of BMW OF NORTH AMERICA, INC.