86 21... Installing seal for rear lid and side lid: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Always position end face of seal in a straight area only:
e.g. on cross-member or on upper hood ridge of rear lid.
Suitable areas on side lids:
Upper and lower hood ridge.
Sealing lip of seal must point outwards.
After installing from inside and outside, check correct seating between lid seal and lid. Lid must rest without air on lid seal.