67 31 ... Notes on initializing electric seat servodrives
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Initialization is carried out at the adjusting switch of the relevant seat.
In this process, the end positions of the relevant electric seat servodrive are recorded and stored.
An initialization must be performed:
- After replacing a drive unit for seat adjustment.
- After replacing/programming control unit for seat adjustment.
Operating sequence for initialization:
Move corresponding seat servodrive(s) into both end positions.