52 17... Removing and installing/replacing left or right thigh support

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Move thigh support (3) as far forward as possible.

Release screws (1).

Tightening torque 52 10 11AZ .

Disconnect plug connections (2).

Remove thigh support (3) towards top.

Fig 1: Identifying Thigh Support, Plug Connections And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, unclip cover (1) towards top and remove.

Installation note:

Secure guide pins (2) in seat frame and clip cover (1) into place.

Fig 2: Securing Guide Pins In Seat Frame

Courtesy of BMW OF NORTH AMERICA, INC.