LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3576 (Front Axle - Repair) >> Output Shaft >> 31 60... Notes on removing and installing Low Profile band clamps >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

31 60... Notes on removing and installing Low Profile band clamps: Removing

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Place special tool 31 5 200 on tabs (1, 2).

NOTE: Make sure that the movable piece (3) of the special tool is placed on lug (1).
Fig 1: Placing Special Tool (31 5 200) On Tabs
G08504676Courtesy of BMW OF NORTH AMERICA, INC.

Compress Low Profile band clamp with special tool 31 5 200 until end of band clamp (1) lifts up.

Relieve tension on special tool and remove Low Profile band clamp.

Fig 2: Compressing Low Profile Band Clamp Using Special Tool (31 5 200)
G08504677Courtesy of BMW OF NORTH AMERICA, INC.