April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 13... Control unit plugs, 25-, 35-, 55-, 83-, 88-pin

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2016 BMW 435i xDrive, 2016 BMW 435i, 2016 BMW 428i xDrive, 2016 BMW 428i, and 2015 BMW 435i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

Release screws (1).

Lever out pin sensor (2) with gasket (3) in direction of arrow.

Fig 1: Removing Pin Sensor With Gasket

G08509612

Courtesy of BMW OF NORTH AMERICA, INC.

Remove gasket (3)

Pull out housing lock (4) in direction of arrow and unlock.

Fig 2: Pulling Out Housing Lock

G08509613

Courtesy of BMW OF NORTH AMERICA, INC.

Press down retaining hook (5) of corresponding contact and pull out cable with contact.

Special tool 61 0 312 (61 1 134) for mini flat spring contacts.

Special tool 61 0 314 (61 1 135) for mini flat spring contacts.

Fig 3: Pressing Down Retaining Hook

G08509614

Courtesy of BMW OF NORTH AMERICA, INC.

Special tool 61 0 315 (61 1 151) for double flat spring contacts (dual retaining hooks).

Fig 4: Pressing Double Flat Spring Contacts (Dual Retaining Hooks)

G08509615

Courtesy of BMW OF NORTH AMERICA, INC.

Special tool 61 0 323 (61 1 152) for double flat spring contacts (special retaining hook).

Fig 5: Pressing Double Flat Spring Contacts (Special Retaining Hooks)

G08509616

Courtesy of BMW OF NORTH AMERICA, INC.