41 00... Replace bolts

Single ball/double ball (version 1): 

Grind off any residues of the single ball (1), if applicable.

Drill hole with diameter 7 mm.

Fig 1: Identifying Single/Double Ball (Version 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Set blind rivet nut (1).

Screw in single ball with thread until a height of 5 mm (double ball 10 mm) is reached.

Fig 2: Identifying Blind Rivet Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Single ball/double ball (version 2): 

Grind off any residues of the single ball (1), if applicable.

Clean area with solvent cleaner R1.

Fig 3: Identifying Single/Double Ball (Version 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Clean bonding surface of repair element single ball (1) with solvent cleaner R1.

Bond repair element to same position using adhesive K5.

Fig 4: Identifying Repair Element Single Ball Surface

Courtesy of BMW OF NORTH AMERICA, INC.

Coarse threaded bolt (version 1): 

Grind off any residues of the coarse threaded bolt (1), if applicable.

Fig 5: Identifying Threaded Bolt (Version 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Spot weld coarse threaded bolt to same position.

Fig 6: Identifying Spot Weld Coarse Threaded Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Coarse threaded bolt (version 2): 

Grind off any residues of the coarse threaded bolt (1), if applicable.

Drill hole with diameter 7 mm.

Set blind rivet coarse threaded bolt using riveting pliers.

Fig 7: Identifying Threaded Bolt (Version 2)

Courtesy of BMW OF NORTH AMERICA, INC.