Failure of the component
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
If the rail pressure regulating valve fails, the following behavior is to be expected:
- Fault entry in the engine control unit
- If activation of the rail-pressure regulating valve is interrupted or there is a short circuit to earth, the engine shuts down.
General notes
The service function 'Rail pressure regulating valve adaptation' must be run if the rail pressure regulating valve is replaced. Execution of the service function deletes the adaptation value. After installation of the new rail pressure regulating valve, the new value is learned with the engine running and stored in the DDE.
We can assume no liability for printing errors or inaccuracies in this document and reserve the right to introduce technical modifications at any time.